Usage areas * Used in coating, bonding and lamination applications * Provides a very good bonding and flexibility by penetrating the wood * Used in composite applications * Suitable for fiber laying and winding processes * It is used in making putty with auxiliary fillings and in repair/repair processes. * Used in reinforced concrete lamination processes to chemical waste and water tanks * Not suitable for table casting   Product features * Packaged in 1600 gram set as A and B components * Used at a ratio of 3:1 by weight (3 parts resin + 1 part hardener) * It has a transparent appearance * Odorless * Solvent free * Rigid flexible structure does not crack * Working time: 15-20 minutes * First touch dry: 5-6 hours * Hard drying time: 24 hours   Epoxy Lamination Resin Usage Mix the two products packaged as A and B components together as 3A and 1B. Make the mixture using a scale and while mixing, pour the “A” component into the “B” component and mix at a slow speed until a homogeneous and smooth image is obtained. The prepared mixture is used in the appropriate technique according to the type of application to be made and left to dry. For detailed information about the application, please contact the technical units.   Considerations * The product has two components and cannot be used without mixing the components. * Never heat the product during mixing and application. * Use precision scales while preparing the mixture of products. * For whatever reason, do not mix any other material into the product that you are not sure of its suitability for the system. * Make sure that the equipment you use during the application is dry and clean. * Work at room temperature. Low temperature may cause delayed drying and high temperature may cause premature drying. * After making sure that the poured product has completely hardened, remove it from the mold or proceed to other processes. * Do not forget to use work safety equipment. * Avoid contact with your skin. * Store the product you are not using in a closed area at 10 and 30 C degrees, away from direct sunlight. * Do not keep the products open. * Do not leave the products obtained as a result of the mixture under direct sunlight. * Yellowing in the packaging may occur in the products that are waiting unused.   All of the information is given as a suggestion to get the best results from the application. It is the user’s sole responsibility to use the product for its intended purpose.

Usage areas

* Used in coating, bonding and lamination applications

* Provides a very good bonding and flexibility by penetrating the wood

* Used in composite applications

* Suitable for fiber laying and winding processes

* It is used in making putty with auxiliary fillings and in repair/repair processes.

* Used in reinforced concrete lamination processes to chemical waste and water tanks

* Not suitable for table casting