Filter

Show:

Sort by:

  • Flex Clear Flexible Epoxy Resin

     €40,00 – €969,00
    • Suitable for filling and assembly processes.
    • Suitable for flexible object and part production.
    • Suitable for all applications where flexibility is required.
    • 1:1 mixing ratio (by weight)
    • Clear
    • Flexible
    • Odorless
    • Solvent Free
    Select options

  • Norm Medium Epoxy Resin for Lamination & Composite

     €51,00 – €585,00

    Usage areas * Used in coating, bonding and lamination applications * Provides a very good bonding and flexibility by penetrating the wood * Used in composite applications * Suitable for fiber laying and winding processes * It is used in making putty with auxiliary fillings and in repair/repair processes. * Used in reinforced concrete lamination processes to chemical waste and water tanks * Not suitable for table casting   Product features * Packaged in 1600 gram set as A and B components * Used at a ratio of 3:1 by weight (3 parts resin + 1 part hardener) * It has a transparent appearance * Odorless * Solvent free * Rigid flexible structure does not crack * Working time: 15-20 minutes * First touch dry: 5-6 hours * Hard drying time: 24 hours   Epoxy Lamination Resin Usage Mix the two products packaged as A and B components together as 3A and 1B. Make the mixture using a scale and while mixing, pour the “A” component into the “B” component and mix at a slow speed until a homogeneous and smooth image is obtained. The prepared mixture is used in the appropriate technique according to the type of application to be made and left to dry. For detailed information about the application, please contact the technical units.   Considerations * The product has two components and cannot be used without mixing the components. * Never heat the product during mixing and application. * Use precision scales while preparing the mixture of products. * For whatever reason, do not mix any other material into the product that you are not sure of its suitability for the system. * Make sure that the equipment you use during the application is dry and clean. * Work at room temperature. Low temperature may cause delayed drying and high temperature may cause premature drying. * After making sure that the poured product has completely hardened, remove it from the mold or proceed to other processes. * Do not forget to use work safety equipment. * Avoid contact with your skin. * Store the product you are not using in a closed area at 10 and 30 C degrees, away from direct sunlight. * Do not keep the products open. * Do not leave the products obtained as a result of the mixture under direct sunlight. * Yellowing in the packaging may occur in the products that are waiting unused.   All of the information is given as a suggestion to get the best results from the application. It is the user’s sole responsibility to use the product for its intended purpose.

    Select options

  • Mote Rigid High Strength Clear Epoxy Resin

     €63,00 – €527,00

    Usage areas * Suitable for applications requiring heat resistance * Applications prepared on the lathe, sanded and polished by machine * Jewelry & Accessories (Necklace, bracelet, ring etc.) * Grip * Rosary * Not suitable for table casting   Product features * Packaged as a set of components A and B * It has a transparent appearance * High heat resistant * Hard * Suitable for working with machine and lathe * Odorless * It is glossy * It dries without heating and in slow motion   Usage Mix the two products packaged as A and B components together. While mixing, pour the “B” component into the “A” component and mix at a slow speed until a homogeneous and smooth image is obtained. After subjecting the prepared mixture to vacuum treatment, pour it into the mold to be applied and let it dry.   Considerations * The product has two components and cannot be used without mixing the components. * Do not use outside the specified application thickness range. Low thickness may cause delayed drying and high thickness may cause burning/yellowing problem. * NeveHigh Strengthr heat the product during mixing and application. * To obtain a completely foam-free result, use a vacuum machine. * Use precision scales to measure. * For whatever reason, do not mix any other materials that do not fit the system into the product. * Make sure that the equipment you use during the application is dry and clean. * Try to work at a constant ambient temperature as much as possible. * After making sure that the poured product has completely hardened, remove it from the mold. * Do not forget to use work safety equipment. * Avoid contact with your skin. * Store the product you are not using in a closed area at 10 and 30 C degrees, away from direct sunlight. * Do not keep the products open. * Do not leave the products obtained as a result of the mixture under direct sunlight. * In the product that has been waiting for a long time without being used, yellowing may occur inside the package. All of the information is given as a suggestion to get the best results from the application. It is the user’s sole responsibility to use the product for its intended purpose.

    Select options

  • Norm Slow Epoxy Resin for Lamination & Composite

     €55,00 – €454,00

    Usage areas

    * Used in coating, bonding and lamination applications

    * Provides a very good bonding and flexibility by penetrating the wood

    * Used in composite applications

    * Suitable for fiber laying and winding processes

    * It is used in making putty with auxiliary fillings and in repair/repair processes.

    * Used in reinforced concrete lamination processes to chemical waste and water tanks

    * Not suitable for table casting

    Select options