Usage areas * Suitable for applications requiring heat resistance * Applications prepared on the lathe, sanded and polished by machine * Jewelry & Accessories (Necklace, bracelet, ring etc.) * Grip * Rosary * Not suitable for table casting   Product features * Packaged as a set of components A and B * It has a transparent appearance * High heat resistant * Hard * Suitable for working with machine and lathe * Odorless * It is glossy * It dries without heating and in slow motion   Usage Mix the two products packaged as A and B components together. While mixing, pour the “B” component into the “A” component and mix at a slow speed until a homogeneous and smooth image is obtained. After subjecting the prepared mixture to vacuum treatment, pour it into the mold to be applied and let it dry.   Considerations * The product has two components and cannot be used without mixing the components. * Do not use outside the specified application thickness range. Low thickness may cause delayed drying and high thickness may cause burning/yellowing problem. * NeveHigh Strengthr heat the product during mixing and application. * To obtain a completely foam-free result, use a vacuum machine. * Use precision scales to measure. * For whatever reason, do not mix any other materials that do not fit the system into the product. * Make sure that the equipment you use during the application is dry and clean. * Try to work at a constant ambient temperature as much as possible. * After making sure that the poured product has completely hardened, remove it from the mold. * Do not forget to use work safety equipment. * Avoid contact with your skin. * Store the product you are not using in a closed area at 10 and 30 C degrees, away from direct sunlight. * Do not keep the products open. * Do not leave the products obtained as a result of the mixture under direct sunlight. * In the product that has been waiting for a long time without being used, yellowing may occur inside the package. All of the information is given as a suggestion to get the best results from the application. It is the user’s sole responsibility to use the product for its intended purpose.