Sea Clear Epoxy Resin for Resinart
Best for Resinart
Sea was developed with resinart artists especially for resinart.
Great Oceanviews & Seaviews
Its chemical structure is suitable for lacing effect.
Extra Hard Top Coat
Its superior hardness provides resistance to scratches and heat.
Colors that do not mix
Its consistency prevents the colors from mixing with each other.
For Small Volume Hobby Use
Packaged as set of part A and part B
Shiny
No Odor
Solvent Free
No Volatile Substances
Mixing Ratio
1:1
(by weight)
Pot Life:
Hard Dry:
20 – 25 minutes
12 – 16 hours
*at 23 °C
Usage
Mix the two products packaged as Component A and Component B, 2A and 1B. Make the mixture using a scale and while mixing, pour the “A” component into the “B” component and mix at a slow speed until a homogeneous and smooth appearance is obtained. If you wish, you can vacuum the mixture. When the mixture is ready, pour the mixture on the area you will be applying.
Technical Details
Considerations
- Epoxy resin is two-component and cannot be used without mixing the components.
- Do not use outside the specified application thickness range. Low thickness may cause late drying and high thickness may cause burning / yellowing problem.
- Never heat the product during mixing and application.
- Use a hot air gun to remove surface foam, or you can quickly pass a blue burner flame from the surface.
- Use a vacuum machine to completely eliminate the possibility of air bubbles.
- When preparing the mixture of products, always use sensitive scales.
- For whatever reason, do not mix any material that does not fit the system into the product.
- Make sure that the equipment you use during the application is dry and clean.
- Take care to do the applications at room temperature (+23 ° C).
- Low temperature may cause late drying and high temperature may cause premature drying.
- Low temperature causes thickening in the consistency of the products and may cause differences in application results.
- Low temperatures may cause crystallization in resins. Before using, allow the crystallized resin to dissolve by exposing it to +60 ° C to +80 ° C temperature.
- Do not move the system until you are sure that the spilled product is completely hardened. Otherwise, it may cause undulation on the surface.
- Do not forget to use work safety equipment.
- Avoid contact with your skin.
- Epoxy resins can cause allergies. If you observe an allergic reaction on your body, consult a doctor immediately.
- Store the unused product indoors at temperatures between +15 and +35 ° C, away from direct sunlight.
- Do not keep the products with the cover open.
- Keep away from children.
- Do not leave the products obtained as a result of the mixture under direct sunlight.
- Yellowing inside the package may occur in products that are waiting unused.
Buy Now
Resin Calculator
You can easily calculate how much epoxy you need.
Frequently Asked Questions
You can find answers to frequently asked questions about epoxy.
Technical Documents
You can request product documents such as TDS, MSDS etc.