Grip Lumen is an ultra-clear epoxy resin that is the perfect choice for light projects like pools, chandeliers, night lights, floor lamps, desk lamps, wall lights and many creative light projects. With its ability to be used with different lighting including LED, strip lighting, small cable lighting and more, Grip Lumen is a versatile product for all your projects. This epoxy resin shines in applications such as manufacturing, installation, and construction.

Resinin Grip Lumen is an advanced material with a wide variety of applications in the field of electronics. It provides excellent protection against environmental factors such as humidity, water, oils, some acids, some bases and atmospheric gases. Resinin Grip Lumen can be applied to both the top surface or bottom surface of lighting to protect against moisture penetration through solder joints or holes.

This product has excellent clarity and gloss properties that make it suitable for applications such as decoration, interior, which must be aesthetic.

You can use Grip Lumen in 4 easy steps:

Measure: The first step is to measure out the amount of epoxy you need. You can use Grip Lumen up to 2 cm thick. If you want a layer then you should measure out about 2 mm of epoxy per square cm of surface area. You can use our Epoxy Calculator for measuring.

Mix: Next, mix together the resin and hardener in a disposable cup or container, following the user manual. Make sure that they are thoroughly mixed before pouring.

Pour: Finally, pour the mixed resin and hardener while making sure that they are evenly spread out.

Wait: Epoxy needs to be left for a certain amount of time before it can be handled. Grip Lumen needs to cure, which takes about 18-24 hours. A good rule of thumb is to allow the epoxy to cure for at least 24 hours before handling.

It is important to mix the epoxy resin and hardener at the right ratio to ensure that the adhesive will set properly. The mixing ratio for Grip Lumen is

• 2:1 by weight

• 100:55 by volume

You can mix Grip Lumen epoxy resin with a ratio of 2 parts hardener to 1 part resin by weight or 100 parts hardener to 55 parts resin, both are right methods.

When you use the mixing ratio by weight, you should use a scale. When you are using the mix ratio by volume, you should use measuring cups. If you are not sure which one to use, we recommend that you use the scale because it is more accurate.

The Grip Lumen epoxy resin is a two-component system which means it needs two separate components, hardener and resin, to form a strong bond. To calculate the amount of epoxy resin to use, you need to know how many resin you will need.

Our Epoxy Calculator page can help you calculate the epoxy mixing ratio for your project. All you need to do is enter the dimensions of your project and our calculator will do the rest.

Grip Lumen is a two-part epoxy resin that can be cured at room temperature. All you need to do is mix the two components together and then pour it on your application area. This epoxy has an excellent grip and it can be used for many different purposes.

The Grip Lumen epoxy resin is easy to use for beginners, but it also has many advanced features that make it perfect for professionals. It has high strength, low viscosity, and good adhesion properties. All you need to do is follow the steps in the user manual and you will be able to complete your project without any difficulty.

Epoxy is a strong, hard and versatile material. It can be used in many different applications and is one of the most popular materials for lighting projects. Epoxy has many properties that make it an excellent choice for lighting and other applications. One of these properties is its resistance to many fluids.

Grip Lumen is a type of epoxy that has additional features to resist acids and bases as well as other types of fluids. This is an excellent choice for applications that interact with many substances.

Grip Lumen resists acids, bases, water, and oils, making it perfect for use in lights or any application where there are liquids present that could damage the epoxy over time.

Grip Lumen is a high-performance epoxy coating with a very low viscosity. It is resistant to cold temperatures, it has a limited strength of +120 °C and a continuous strength of +70 °C.

Grip Lumen can be used in various applications such as on the outside of pipes, tanks, water tanks and boilers in order to protect them from corrosion and chemical attack. Grip Lumen is used in many different industries like construction, the automotive industry, and even aerospace.

Grip Lumen is a two-component, high-strength epoxy. Grip Lumen can withstand constant cold down to -20 °C and has limited strength of +120 °C and a continuous strength of +70 °.