Ultra Clear Epoxy Resin System For Large Volume Applications
Suitable for large volume applications
Ultra clear
Dries slowly and without heating
Odorless
Bright
Solvent free
Does not contain volatile substances
Mixing ratio is 10:4 (by weight)
Jel time is
2-3 hours
Demolding time is
2-5 days
Usage
• The product is packaged as A (Resin) and B (Hardener). Mix the two products together in a ratio of 10: 4. (For example, for 280 grams of mixture, mix to 200 grams of A and 80 grams of B.
• Prepare the mixture using sensitive scales.
• For a better mixture, first add hardener to the mixing bowl and then add the resin on it and mix it for at least 2 minutes at a slow speed until a smooth appearance is obtained.
• Leave the prepared mixture to rest for about 5 minutes and then pour it onto the surface / mold you will apply and let it dry.
Considerations
• The working time of the mixture is 2 – 3 hours. The prepared mixture should be used within the working time.
• Volumetric measurements made with tools such as beaker, cup, syringe, etc. will cause incorrect mixing ratio. In order to adjust the mixture amount correctly, you must use sensitive scales.
• In order to minimize the formation of bubbles and air bubbles, take care to make the casting slowly and from a single point.
• You can use a hot air gun and / or smooth to remove bubbles formed on the surface after casting.
• In order to reduce the formation of air bubbles and bubbles in applications, a vacuum machine must be used.
• Resin should not be moved after it has started to gel. Otherwise, fluctuations in texture and surface may occur.
• The cast resin can be removed from the mold after approximately 2 – 5 days. After the product is removed from the mold, it starts the final hardening process and this hardening process continues for 7 days.
• Work at room temperature. Low temperature can cause late drying and misting, and high temperature may cause early drying, yellowing and burning.
• Never heat the product during mixing and application.
• For any reason, do not mix any other material that does not fit into the system.
• Make sure that the equipment you use during the application is dry and clean.
• Do not forget to use safety equipment.
• Avoid contact with your skin. You may have an allergic reaction.
• Store the product you do not use at a temperature of 10 and 30 degrees C in a closed area away from direct sunlight.
• Do not keep the products openly.
• Do not leave the products obtained as a result of the mixture under direct sun.
• In-product yellowing may occur in the product waiting for a long time.
Cold ambient conditions cause the epoxy resins to whiten, solidify and have a candied appearance. When you observe these situations, your epoxy resin is crystallized. Soak the bottles in 60°C-80°C water until they become transparent, so that they can be reused.
Frequently Asked Questions
We have answered questions about the use of epoxy for you. Check out the frequently asked questions.
How much epoxy should I use?
Don’t know how much epoxy to use? You can easily calculate how much epoxy you need to use by entering the dimensions.